Yes, the difference is enormous and is perceived after just a few minutes.
The existing thermostat can be easily replaced with Heating regulator IR Sun WiFi. Installation is very simple. Simply remove your thermostat and attach the Heating regulator IR Sun WiFi.
You can install the app on smartphones running Android or iOS mobile operating systems.
Yes, you can control all the regulators you’re connected to at the same time. However, you can manage only a few of them, or just one.
The heating regulator IR Sun WiFi has been designed to function completely automatically. You only should select the desired room temperature and then you can immediately enjoy the warmth.
Regulator IR Sun WiFi works on every IR heating panel.
The regulator has to be installed on the inner wall which is not exposed to the Sun's rays. It is installed in the standard flush-mounted socket (Ø 68 mm).
The size of the screen is 114x80 mm. The power supply part is hidden under the socket and is 26.75 mm wide.
The heating regulator IR Sun WiFi reduces heating power consumption. Just think about how much electricity is unnecessarily consumed when heating the premises to a higher temperature that we wish for. For example, if you wish to have a temperature of 21 °C, the conventional thermostats heat up to 21.5 °C or more. The heaters then switch off and heat up again only when the room temperature drops to 20.5 ° C. Many thermostats also tend to measure the room temperature incorrectly, which is why the rooms are usually heated to a higher temperature as wanted.
It can also be that too weak heaters are installed in the room. If so the heaters have to work 24 hours on full power and the electricity consumption is extremely high. In this case, heating regulator IR Sun WiFi will inform you in due time that your heaters are too weak.
A lot of energy is also consumed in case of inappropriate ventilation. In case ventilate the room too long the Heating regulator will draw our attention to it.
Yes of course. The programming has never been easier. With just a few touches on the screen, the settings can be adjusted. Research showed, that if we are heating less at night or when we are not at home the energy consumption will reduce for at least 12%.
You probably have problems with your wireless internet. If necessary, an additional signal-enhancing router should be installed where it is a weak signal or redirects it to where it is needed.
Of course, it is. Refer to the operating instructions for the setup process.
The heating regulator has a 10 cm diagonal touch screen and the data is very clearly and user-friendly arranged.
Heating regulator IR Sun WiFi detects ventilation and reacts accordingly. The regulator signals us if the room is not correctly ventilated. A correct room ventilation is short and intense. It is for example not appropriate to keep the windows always half open.
Due to the temperature differences, the IR heaters which are made of aluminium stretch. The stretching can also be heard – the voice can be described as "cracking". Because the IR heaters connected to the heating regulator are no longer exposed to such temperature differences, the heaters will not crack any more. That is why the IR heaters made of aluminium in combination with the heating regulator are now noiseless.
The Website uses cookies. You agree to the cookies with the further use. More about cookies